Flat Roof Advantages & Its Easy Replacement

Roof, without a doubt, is the most important structure of any building, protecting us from the external environment and furies of weather. For the very important role it plays, it deserves our special attention and care. There are various types of these fundamental structures, out of which flat and sloped are the common ones. 

Depending on their preference and choice, people opt for any of the two mentioned above. Flat roofs are commonly used for commercial sites like residential apartments, hospitals, industries, shopping malls, educational institutes, airports, whereas sloped roofs are popular amongst homeowners.  

Let us explore the major differences between the two roof types.

• Damages that they are vulnerable to:

Flat roofs due to their flat structure are susceptible to standing water/ice that can have detrimental impacts on the building. Therefore, it is imperative to remove any water/ice from your roofs to prevent any degradation.

Sloped roofs are likely to get their shingles blown away during a heavy storm and rain. So, both types can be damaged in different ways. 

In case of any severe damage, roofs can be replaced. Roofing Services are provided by flat roofing contractors.

• Life:

Flat roofs tend to live for about a decade or more, and will after this period require a flat roof replacement. Whereas, sloped roofs, pertaining to their structure, live more than 20 years. 

• Inner-contents:

Sloped roof is made up of a roof decking, an underlayment and shingles. Flat roofs, on the other hand, are single-layered. Moreover, a flat roof can be coated with special materials to make it impermeable to water and maintain a moderate temperature on the inside. These insulating materials tend to increase the roof’s lifespan. Thus, if you install a flat roof make sure you ask the flat roof contractors to coat it with this insulator.

• Cost:

Sloped roofs are comparatively expensive to be installed; flat roof replacement requires less materials, thus are more affordable.

Advantages of Flat Roofs:

Flat roofs are opted for commercial buildings for being practical. Following are the benefits these roofs proffer to their owner. 

• Spacious:

Flat roofs give an extra space to the owner. Depending on one’s preference, one might choose various purposes to use their roof for. Some might put their unwanted items, some make roof gardens, some mansions might also have pools on their flat roofs, they can also serve as a living space for the owners, or an extra open used for outdoor parties and barbeque dinners, or probably a resting area to get a fresh air or a walk during hectic office hours.

Gardens on flat roofs aren’t only aesthetically pleasing but eco-friendly, just a small gesture to give fresh oxygen to our environment. Moreover, plants on rooftops have a cooling effect on the building, acting as a barrier to direct sunlight, thus decreasing the inner temperature by a few degrees.

• Less-time:

Flat roof installation takes comparatively less time as compared to sloped roofs. The reason being that flat roofs are single-layered and don’t involve use of a lot of materials.

• Solar Panels:

Flat roof tops are also used for installing solar panels. Most commercial sites like factories get their electricity from solar systems that are safely installed over rooftops. In fact, residential buildings can also get their electricity needs fulfilled by solar system panels installed on flat roof tops. 

• Less-effort Required:

The simplicity of structure implies that less mechanical work and labor is required. Other roof types, for instance, sloped roofs need more materials, more effort and consequently more time is required to get the installation/replacement done.

• HVAC System Installation:

Other roof forms might not support the HVAC system units. Flat roofs are great areas where these units can be placed safely. Furthermore, there are less chances of any damage done to the units by children or pets. 

• Drainage System:

Flat roofs are notorious for a poor drainage system. But, flat roof contractors install these with a slight slope, which will prevent any standing rain water. It means that flat roofs aren’t completely flat and are installed at an angle so water can easily flow to and through gutters and to the ground through downspout. This prevents any water leaking into the building that can cause the production of molds and mildews, and consequently the degradation of the building.

• Easy Replacement:

Another important factor that makes flat roofs better than others is the flat roof replacement process that involves less hassle. Unlike other roof replacements that involve more complications.   

• Maintenance:

Flat roofs are easier to maintain as compared to other types. Flat roof inspections are easier and involve less risk and effort, which is why it is more cost-effective.

These roofs are unique in their own way and have their own peculiarities, which is why companies specialized in flat roofing should be hired for Flat Roof Replacement Services in Fort Worth TX.